1.2 TM-J9000/J9100 Specifications Table 1-2 Printer specifications 1-2 General Features Rev. F TM-J9000 TM-J9100 Print method Serial ink-jet dot matrix, 64 nozzles × 1 line Serial ink-jet dot matrix, 64 nozzles × 2 lines Print resolution 180 × 180 dpi Print font Font Font A/Font B:12 × 24/9 × 17 (Can be changed to 11 × 24/8 × 17 using memory switches Msw 8-5, 6, and 7. See Section 2.7.2, “Memory Switches,” on page 2-13. Columns (standard) Font A/Font B Validation/transaction: 62/82 (Can be changed to 67/93 using memory switches Msw 8-5 and 6. See Section 2.7.2, “Memory Switches,” on page 2-13. Roll paper: 40/53 (Can be changed to 43/60 by using memory switch Msw 8-7.
See Section 2.7.2, “Memory Switches,” on page 2-13. Character size (W × H) (standard) Font A/Font B: 1.69 × 3.38 mm/1.27 × 2.40 mm {0.067 × 0.133"/0.05 × 0.095"} Character type 95 alphanumeric, 48 international characters, 128 × 11 (including a user defined page) graphic Print speed Validation: Font A: Economy mode: 7.5 lps Validation: Font B: Economy mode: 11 lps Roll paper: Font A: Economy mode: 10.1 Ips Roll paper: Font B: Economy mode: 14.3 Ips Paper Check/Validation/Feeder: Type: Normal Dimensions: (H × W): 68 mm ~ 100 mm × 152 mm ~ 230 mm {2.68 ~ 3.94 × 5.98 ~ 9.06"} (minimum: 68 mm ~ 152 mm {2.68 ~ 5.98"}) Thickness: (only single-ply paper can be used):
0,09 mm ~ 0.13 mm {0.0035 ~ 0.0051"} Roll paper: Type: Normal Width: 76 ± 0.5 mm {2.99 ± 0.02"} Maximum outside roll diameter: 60 mm {2.36"} Spool inside diameter: 10 mm {0.39"} or more ASF unit paper supply (only for the ASF model) Number of sheets that can be loaded:25 sheets or less (3.5 mm {0.14"} or less) If some sheets are creased, fewer can be loaded. Ink cartridge Exclusive ink cartridge: SJIC8(K) Exclusive ink cartridge: For color 1: SJIC6(K) For color 2: SJIC7(R), SJIC7(B), SJIC7(G) Power supply +24 VDC ± 10% Current consumption Operating Mean approx. 1.0A (printing alphanumeric characters in Font A) Peak approx. 3.5A Standby Mean approx. 0.2A