For Ethernet Interface Connect the printer to a network by a LAN cable via a hub. When LAN cables are installed outdoors, make sure devices without proper surge protection are cushioned by being connected through devices that do have surge protection. Otherwise, the devices can be damaged by lightning. Never attempt to connect the customer display cable, drawer kick-out cable, or a standard telephone line cable to the 10/100BASE-T LAN connector. CAUTION For Ethernet interface communication settings, use TM-L500A Utility or EPSON TMNet WinConfig utility. For detailed information about the setting methods, see the TM-L500A Utility User’s Manual or EPSON TM Net WinConfig User’s Guide.
Connect a 10/100BASE-T cable to the 10/100BASE-T LAN connector by pressing firmly until the connector clicks into place. 42