Chapter 4 Handling 3 Insert the end of the paper under the rollers. The paper is fed automatically. 4 Close the paper loading cover. The paper is fed to the position of a punch hole or a black mark, and cut automatically. Close the paper loading cover immediately. If it is left open for 1 minute or longer, paper feeding may not be correct. Replacing Paper Follow the steps below to replace paper. 1 Turn on the printer. 2 Hold down the Unload ( ) button until the paper starts feeding back- ward. 4 3 After paper feeding stops, remove the paper by pulling it backward. 4 Open the paper loading cover by pulling up the cover open lever. 55