1.2.6 Power Switch Cover To prevent unintentional contact or improper changes and to improve the appearance, use a power switch cover. When using the power switch cover, to turn on or off the TM printer, press the power switch through the hole in the power switch cover. Attach the cover as shown in the illustrations below. TM-L90 4** models, TM-L90 Peeler 39* models 2 3 1 TM-L90 other than 4** models, TM-L90 Peeler other than 39* models 2 1 WARNING: If an accident occurs with the power switch cover attached, unplug the power cord immediately. Continued use may cause fire or shock. CAUTION: Do not remove the power switch soft cover.
(only for TM-L90 4** models and TM-L90 Peeler 39* models) 18 Product Overview