TM-P60 Technical Reference Guide 3. Set the new roll paper on the inside of the roll paper cover. Note: Note the direction the paper comes off the roll. 4. Pull the leading edge of the roll paper. 5. Align the left edge of the roll paper with the edge of the cover. 6. Close the cover and tear off the paper with the manual cutter. Since the Bluetooth radio wave output is relatively limited, communication can be affected by the setup location, direction installed, other devices in the area, etc., which may disrupt or decrease the speed of communication. As a result, make sure to thoroughly check device operation prior to use. Rev. A Setup 2-7