TM-P60 Technical Reference Guide Memory Switch Select the “Memory Switch” tab. Press the “Get Status” button to retrieve and display the current settings. Memory Switch 8 *: Default Setting • Msw 8-1 : If On is selected, the printer sends power off notifications, power on notifications, and battery status to the host PC. If Off is selected, the printer does not send these notifications. • Msw 8-2 : If On is selected, and the battery status is “Level L” or “Level S,” the buzzer will sound for 10 seconds. • Msw 8-3, 8-4, 8-5 : If On is selected, the buzzer sounds in 10 seconds for these statuses. See “3.1.1 Error Types” (page 3-1) “ for further details regarding printer errors (Msw 8-5).
After setup, press the [Refresh Status] button to write the settings to the printer. Rev. A Setup 2-19 SW Function On Off 1 Status notification *1 Transmits* Does not transmit 2 Buzzer sound when battery is not charged Buzzer sounds * Buzzer does not sound 3 Buzzer sound when printer and host device are not connected Buzzer sounds Buzzer does not sound * 4 Buzzer sound when roll paper roll is out Buzzer sounds * Buzzer does not sound 5 Buzzer sound if an error occurs Buzzer sounds * Buzzer does not sound 6 ~ 8 Reserved - Fixed to Off*