Chapter 2 Setup Changing the paper width (autocutter model only) You can attach the supplied paper guides to the roll paper holder and change the roll paper width from 80 mm to 76 mm. After changing the paper width from 80 mm to 76 mm, do not change it back to 80 mm. The autocutter blade may be worn and may not be able to cut cleanly. Make sure that you attach two paper guides and that the metal part comes inside (on the side facing the roll paper) when attaching them. Metal parts Paper guides 2 1 Make sure that the printer is turned off. 2 Press the open button to open the roll paper cover. 3 Align the two protruded parts of the paper guides with the angle holes of the printer. 35