Setting up from a Windows Computer Necessary Items TM printer: TM-P80 Computer for setting: Windows computer Utility for setting: EpsonNet Config USB cable 1 Connect the printer to a PC via the USB cable. See "USB Interface" on page 41 . 2 Turn on the host computer. 3 Turn on the printer. 4 Start up the EpsonNet Config. When the EpsonNet Config is started up, the battery LED (the remaining battery charge is indi- cated) goes off and the Feed button is disabled. 5 Double-click on the printer. 6 Configure the [Network] settings and the [TCP/IP] settings. 7 Disconnect the USB cable, turn off the printer, and then turn it back on.
To start wireless LAN communication, be sure to disconnect the USB cable, turn off the printer, and then turn it back on. If you need to configure other settings, use EpsonNet Config (web version). For information about EpsonNet Config (web version), see "Starting EpsonNet Config (Web Version)" on page 68 . 44