Chapter 3 Advanced Usage Paper Layout Setting You can make settings for paper type and size in Paper layout setting. Paper type is set to Receipt paper (without black mark) as default. In case of using the Receipt paper (with black mark), you must select the Receipt paper (with black mark) for paper type. When the paper layout setting and the actual paper you are using do not match, the following situations may occur. When Paper Type Setting is set to Receipt paper (without black mark) and receipt paper (with black mark) is used, the printer detects paper out.
When Paper Type Setting is set to Receipt paper (with black mark) and receipt paper (without black mark) is used, a paper error occurs. To make the Paper Layout Setting, there are following options available. Setting with the APD Set the size of the paper that you are using correctly. Setting with the OPOS See the “PTR_DI_SET_PAPERLAYOUT method” in the driver’s Application Development Guide for details to make the settings. 3 Setting with the ESC/POS command See the "Paper layout setting" in the ESC/POS Command Reference for details to make the settings. Setting with the ePOS-Print SDK See “addLayout” method in ePOS-Print SDK User's Manual.
Setting with the ePOS-Print API (available only with the Wi-Fi model) See “addLayout” method in ePOS-Print API User's Manual. For detailed information about the driver, see "Drivers" on page 75 . For detailed information about ESC/POS command, see the ESC/POS Command Reference. For detailed information about downloading the software and manuals, see "Download" on page 76 . 55