Chapter 5 Handling Opening the Locked Roll Paper Cover (autocutter model only) If the roll paper cover is locked, follow the procedure below to open the cover. 1 Make sure that the printer is turned off. 2 Open the battery cover and remove the battery. 3 Turn the screw with a flathead or Phillips screwdriver, and adjust the autocutter blade so that you cannot see it from the paper ejection part. 5 Screw Before adjustment When the autocutter blade is locked After adjustment When the autocutter blade is returned to the correct position The autocutter blade is visible from the paper eject slot.
Autocutter blade Once the autocutter blade returns to the correct position, you can press the open button and open the roll paper cover. 87