Paper Specifications Specified original paper type For the winding direction of a thermal roll, the chromogenic side must face outside. Paper must not be pasted to the roll paper core. For the best print quality for each paper type, it is recommended to set the print density. The print density can be set with the customized value. To set customized value, See "Software Settings" on page 49 . 92 Autocutter model Manualcutter model Type Thermal paper:
Receipt paper (without black mark) Receipt paper (with black mark) Form Roll paper Size Width Outside diameter Roll width when taken up Roll paper core 79.5 ± 0.5 mm {3.13 ± 0.02"} 76.2 ± 0.5 mm {3.00 ± 0.02"} 79.5 ± 0.5 mm {3.13 ± 0.02"} 51.0 mm {2.01"} maximum 80.0 + 0.5/- 1.0 mm {3.15 + 0.02/- 0.04"} Outside diameter: 18.0 mm {0.71"} or more Width: Same as the paper width or less than the paper width by 1 mm {0.04"} Paper type no. Manufacturer P30023, P31023, P35024 Kanzaki Specialty Papers KT55F20, KT48F20 Koehler AF50KS-E Jujo Thermaloy F5041(48), F5041(55) Mitsubishi HiTec