The error recovery command is valid only if a recoverable error (excluding automatically recoverable errors) occurs. 28 Error Error description Error LED flash code Approx.320 ms Approx.5120ms Recovery measure Paper jam error • After initialization, paper detected before the CIS. Remove the paper and call BiCancelError of the TM-S1000 API or turn off/on the power. • Paper jam. (Paper length sensor, middle sensor, franking sensor, or ejection sensors detected paper feed error.) • ASF failed in feeding paper. Remove the jammed paper and call BiCancelError of the TM-S1000 API or turn off/on the power. • Too short/long paper detected.
Remove the paper left in the paper path and call BiCancelError of the TM-S1000 API or turn off/on the power. • Cover opened during paper feeding. If the paper is left in the paper path, remove it and call BiCancelError of the TM-S1000 API with covers closed or turn off/on the power. Reading error (Only when the scanner is set to stop the document at the franking position instead of ejecting it into a pocket if a reading error occurs.) When any of the following errors occurs in the high-speed mode. • A double feeding detected. • Other than “Check was correctly inserted.” detected. • External noise detected.
Open the franker cover, remove the paper, and call BiCancelError of the TM-S1000 API or turn off/on the power. When an application judges an error in the confirmation mode.