Cleaning the MICR Unit Dirt on the MICR unit may cause frequent magnetic character reading errors. Clean the MICR unit every six months or every 100,000 passes. Use the TM-S1000 Utility or your application to clean the MICR unit. KIC Team, Inc. • Waffletechnology MICR cleaning card (model:CS1B15WS) • Epson Check Scanner Cleaning Kit (model:KWEPS-KCS2) Note: For information on cleaning procedures, see the TM-S1000 Utility User’s Manual. Use the following cleaning card: Be sure to dispose of used cleaning sheets. Do not use sticky cleaning sheets. They may cause a paper jam or machine failure.
It is recommended to clean the MICR unit once per week or once every 2,000 checks for good reading results. Troubleshooting ERROR LED is Flashing or Lit ❏ Make sure that the covers are properly closed. ❏ If a paper jam has occurred, remove the jammed paper, referring to the next section “Paper Jams.” ❏ Turn off the scanner, and then turn it on after a while. If the error persists, consult a qualified service person for repair. Paper Jams Open the scanner cover or franker cover to remove the jammed paper. (See “Opening the Covers” on page 10 and “Opening the Franker Cover” on page 10.) 16 TM-S1000 User’s Manual