Product Installation Packing materials are affixed for protection against shock during transportation. Remove the packing materials shown below before installing the product. B C D E A F The packing materials and packaging box are required for future transportation. Keep them in a safe place. Installation Provide sufficient space in a location appropriate for installation.
Location Appropriate for Installation • On an area larger than the bottom surface of the product ( U “Overall Dimensions” on page 94 ) • In a level and stable location • In a location free of vibration and impacts • In a location where a dedicated power outlet is available • In a location with sufficient space around the printer to allow for replacement of consumable products, and daily cleaning • In a location meeting the guaranteed environmental conditions ( U “Environmental Specifications” on page 93 ) • When moving the product, lift it up by grasping at the depressions on either side. • Make sure that cords or other objects are not being pinched by the product.
• To avoid deterioration of the MICR recognition rate, do not install the product near a magnetic field. In particular, check the MICR reader recognition rate when the product is installed near a display device. 36 Removing the Packing Materials