Chapter 5 Handling the Product ID Card Processing This section describes ID card processing. Note the precautions below. Failure to do so can cause ID card reading problems. • Use ID cards in accordance with specifications. • Check to make sure that ID cards are not bent, broken, or excessively embossed. • Do not touch the IC chip of the ID card. • Do not open a cover, touch the ID card, or block the slot while the product is processing an ID card. 1 Insert the ID card into the slot and slide it. 2 Release the ID card after it starts to be fed automatically. 3 After the ID card is ejected, remove it. 5 65