Chapter 3 Advanced Product Use Advanced Product Use Software Settings The product has memory switches and customize values as software setting functions, which can be used for configuring various product settings. Refer to the following section for an overview of each function. Settings can be configured using one of the methods (ESC/POS command, software setting mode, TM-S9000II Utility) shown in the table below. 3 • For information on the software setting mode, refer to “Software Setting Mode” on page 60 . • For details on the TM-S9000II Utility, refer to the TM-S9000II Utility User's Manual.
47 Setting item/setting methods Software setting mode TM-S9000II Utility Memory switch Transmits the power ON information ✔ ✔ Auto line feed ✔ ✔ Remote wake-up ✔ ✔ Roll paper cover open during printing ✔ ✔ Customize value Roll paper print density ✔ ✔ Paper autocutting after closing the roll paper cover ✔ ✔ Roll Paper Reduction ✔ ✔ Print density when multiple tone printing ✔ ✔ Sets time to check ink head cleaning ✔ Validation settings ✔ Cut sheet settings ✔ Time to enter power saving mode ✔ Function to prevent printing on the back side of docu- ments (endorse) without magnetic ink characters ✔ MICR appearance judgment position using the func- tion to prevent printing on the back side of docu- ments (endorse) without magnetic ink characters ✔ R/E Settings for auto Top Logo / Bottom Logo printing ✔ Extended settings for auto Top Logo / Bottom Logo printing ✔