Appendix A Product Specifications Product Specifications General Specifications 91 Auto cutter Cutting method Cutting type Scissors type with separated blades Partial cut (one point uncut on left end) Number of ASF sheets No more than 100 sheets of check paper no thicker than 0.13 mm (ANS I standard). However, total thickness should be no greater than 13 mm , including paper floating Pocket capacity One-pocket model Two-pocket model No more than 100 sheets of check paper no thicker than 0.13 mm (ANS I standard). However, total thickness should be no greater than 13 mm , including paper floating Main pocket No more than 100 sheets of check paper no thicker than 0.13 mm (ANS I standard).
However, total thickness should be no greater than 13 mm , including paper floating Sub-pocket No more than 50 sheets of check paper no thicker than 0.13 mm (ANS I standard). However, total thickness should be no greater than 6.5 mm , including paper floating MICR reader Magnetization method Supported fonts Recognition rate Permanent magnet E13B, CMC7 (Alphabetic characters not supported.) Recognition rate no less than 99% (ANSI standard check at 25°C) False recognition rate no more than 0.1% (ANSI standard check at 25°C) Supported OCR Supported fonts characters OCR-A OCR-B (Support for %, /, and & characters can be implemented by th e driver)