Chapter 1 Product Overview Part Names and Functions 1 2 3 4 5 6 When turning off the printer without using the power button, it is recommended to send a power-off command to the printer. If you use the power-off sequence, the latest maintenance counter values are saved. (Maintenance counter values are usually saved every two minutes.) For information about ESC/POS commands, see the ESC/POS Command Reference. 11 1 Roll paper cover Open this cover to install/replace the roll paper. 2 Cover open lever Use this button to open the roll paper cover. 3 LED lights For details on the LED lights, see "LED Lights" on page 12. 4 Feed button Press this button to feed the roll paper by one line.
Hold down this button to feed the roll paper continuously. 5 Power button Press this button to turn the printer on or off. 6 Status sheet button (Ethernet interface model only) Press this button to print the interface status sheet, or to reset the interface settings.