Chapter 2 Setup Pin assignments Direction - Output Input - Output - 6 5 4 3 2 1 Connecting the Drawer Kick Cable Use a shield cable for the drawer kick cable. When using cash drawer, make sure to use the power supply for printer (connector pins 4). Do not insert a telephone line into the drawer kick connector. Doing so may damage the telephone line or printer. WARNING Connect the drawer kick cable to the drawer kick connector by pressing firmly until the connector clicks into place. 24 Pin number Signal name 1 Frame GND 2 Drawer kick drive signal 1 3 Drawer kick open/close signal 4 +24 V 5 Drawer kick drive signal 2 6 Signal GND