Appendix Ethernet Interface Communication specifications 10BASE-T/100BASE-TX Support protocols Network parameters 72 Protocols Usage IP, ARP, ICMP, UDP, TCP Basic communication protocols LP, LPR Printing protocols TCP Socket Port Used to transfer printing data and printer status via (bidirectional) direct socket communication.
HTTP/HTTPS Used by browsers to display and set module status SNMP Used by dedicated and general MIB tools to acquire and set module and printer status ENPC Used to acquire and set module and printer status DHCP Used to acquire the IP address APIPA Used to assign the IP address Item Default settings IP Address 192.168.192.168*1 Subnet mask 255.255.255.0*1 Default gateway 0.0.0.0*1 IP address acquisition Automatic*2 APIPA Disabled arp/ping Disabled IP Address Printing Enabled*2 Socket Timeout 90 seconds Standard Community Name (Read Only) “public” Community name (Read Only) No Community name (Read/Write) No SNMP IP Trap 1 Disabled SNMP IP Trap 2 Disabled