Extra lower space reduction • Disabled (default setting) • Enabled Line space reduction rate • Not reduced (default setting) • Reduce 25% • Reduce 50% • Reduce 75% Line feed reduction rate • Not reduced (default setting) • Reduce 25% • Reduce 50% • Reduce 75% Amount of reduction in character height • Not reduced (default setting) • Reduce 25% • Reduce 50% • Reduce 75% • Reduces 75% and shortens character height Amount of reduction in barcode height • Not reduced (default setting) • Reduce 25% • Reduce 50% • Reduce 75% Amount of top margin by backfeed Selectable from levels 15 ~ 2 mm (0.5 mm interval) Default setting: level 15 mm • Remove all ejected paper before printing with backfeed.
• Disable the automatic top logo setting when enabling backfeed. • You cannot use backfeed in the following cases even if you have enabled backfeed. ∗ Immediately after auto cutting while the cover is closed. ∗ While the self-test is in progress. • If setting a top margin of 5 mm {0.2"} or less, confirm that no errors occur in your environment of usage. Usage in a hot and humid environment or usage of paper that curls easily may increase the risk of paper jams. • When implementing a backfeed, rubbing smears may occur due to slack in the paper. We recommend using thermal paper with high rub resistance. 62