English 3. Close the roll paper cover; then tear off the roll paper. Note: Be sure to close the cover completely by pushing down on the middle of the cover. Troubleshooting ERROR LED on or flashing ❏ Check to see that the roll paper cover is closed and check the PAPER OUT LED. Close the cover or replace the paper if necessary. ❏ If the printer has been printing a lot, the head may be hot. Wait for the head to cool. Printing will resume automatically. ❏ If the autocutter is jammed, turn the printer off and then back on. ❏ If the roll paper cover will not open, see the section below. ❏ Turn off the printer and then turn it back on.
If the LED is still flashing, call your supervisor or a service person. Paper jam Turn off the power and open the roll paper cover and check for a paper jam. If there is a paper jam, remove the jammed paper and follow the instructions in the Installing the Paper Roll section to prepare the printer for printing. 10 TM-T90 User’s Manual