Be sure to use roll paper that matches the printer’s specifications. See Appendix A, Specifications. ➀ Open the take-up device cover. ➁ Remove the take-up spool from the printer. (If it is necessary, cut the paper go- ing to the take-up spool, using the tear-off edge.) Then remove the roll paper core. If there is roll paper remaining, cut the paper straight across using scissors at the place shown in illustration below. ➂ While pressing the FEED switch, remove the remaining roll paper in the printer by pulling the paper lightly out in the direction of the arrow.
■ Replacing the roll paper for TM-U300C/U300PC Cut here if there is paper remaini ➃ To install a new paper roll, see Installing the paper roll in the TM-U300C/U300PC, on page 11. 17