Chapter 1 Product Overview Paper Specifications 1 Copy capability is greatly influenced by the ambient temperature, so printing must be performed under the conditions shown below: Original + 4 copies: 20 to 45° C {68 to 113° F} Original + 1 to 3 copies: 5 to 45° C {41 to 113° F} The slip paper must be flat, without curls or wrinkles, especially at the top edges. There must be no glue on the bottom edge of slip paper. Choose slip paper carefully since paper feeding is affected by gluing conditions such as position and dimension. OK NG OK/NG OK glued area Paper insertion direction Use thinner paper (N30 or equivalent) between the top and bottom sheets of multi-ply paper.
If thick paper is used, the copy capability is lowered. 19 Paper type Normal paper, Carbon copy paper, Pressure sensitive paper Total thickness 009 to 0.36 mm {0.0035 to 0.0141"} Size (W × L) 70 × 70 mm to 210 × 297 mm {2.76 × 2.76" to 8.27 × 11.69"} (A4 size) Paper Normal paper thickness (single-ply) Carbon copy paper combination Pressure sensitive paper 009 to 0.2 mm {0.0035 to 0.0079"} 5 sheets maximum (original + 4 copies) Backing paper: 0.06 to 0.15 mm {0.0023 to 0.0059"} Copy and original: 0.04 to 0.07 mm {0.0015 to 0.0028"} Carbon paper:
Approximately 0.035 mm {0.0014"} Total thickness: 0.30 mm {0.0118"} or less (original to original + 3 copies 0.36 mm {0.0141"} or less (original + 4 copies) 5 sheets at maximum (original + 4 copies) Backing paper: 0.06 to 0.15 mm {0.0023 to 0.0059"} Copy and original: 0.06 to 0.075 mm {0.0023 to 0.003"} Total thickness: 0.24 mm {0.0094"}or less (original to original + 3 copies 0.30 mm {0.0118"}or less (original + 4 copies)