DIP Switch Bank 2 If you turn on DIP switch 2-7 or 2-8 while the printer power is turned on, the printer may be reset, depending on the signal state. DIP switches should not be changed while the printer power is on. For DIP switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 30 . 28 SW Function ON OFF Factory setting 2-1 Handshaking (BUSY condition) Receive buffer full Offline Receive buffer full OFF 2-2 Customer display (DM-D) connection Connected Not connected OFF 2-3 2-4 Undefined — — OFF 2-5 2-6 Reserved (Do not change settings) Fixed to OFF OFF 2-7 I/F pin 6 reset signal Enabled Disabled OFF 2-8 IF pin 25 reset signal Enabled Disabled OFF