Topdon — TopScan User Manual

4.6 VE Calculator The VE Calculator allows you to calculate the volumetric efficiency of your vehicle engine, which is one of an important engine performance parameters. To calculator the VE: Tap VE Calculator from the home screen, enter the required values including Engine Size, Engine Speed, MAF, Intake Air Temp, Number of Cylinders, and Air Intake Pressure. Then, tap Calculate . 4.7 T-Darts The T-Darts function is used to read transponder information, test remote control frequency and test IMMO / PKE coil. To access the T-Darts function, additional hardware (sold separately) is required. To purchase the T-Darts unit, contact your local dealer.

4.8 Maintenance The TopScan supports 8 special functions, including Oil Reset, Throttle Adaptation, Electronic Parking Brake (EPB) Reset, Steering Angle Reset, Diesel Particulate Filter (DPF) Regeneration, Anti-lock Braking System (ABS) Bleeding, Battery Management System (BMS) Resets, and Airbag Reset. For the advanced TopScan Pro version, there are 5 additional special functions available, which include Injector Coding, Tire Pressure Monitoring System (TPMS) Reset , Sunroof Initialization, Seat Calibration, and Window Calibration.

4.8.1 Services Overview Oil Reset This function allows you to reset the oil service lamp for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and weather events. Oil reset is required every time the engine oil is changed. EPB Reset This function helps you replace and reset the brake pads. It needs to be performed in the following cases: • After the brake pads and brake pad wear sensor are replaced; • When the brake pad warning light is on; • After a short circuit in the brake pad sensor is fixed; • After the servo motor is replaced. 41