1. LCD Screen 2. Buttons Back/Homepage Button. Press it to go back to the previous step. Press and hold it for 3 seconds to go back to the homepage. OK Button. Press it to confirm the action and go to the next page or next step. After setting the charging parameters on the charging mode page, press it to start charging. Left Button. Press it to decrease the value or select the previous menu. Right Button. Press it to increase the value or select the next menu. Start/Stop Button. During charging, press it to stop or restart charging. 3. Output Port 4. Data Port (USB-B) This port is used to connect T120A to a PC (Windows).
When you installed software on the PC, you can view device information, update device firmware, and export charging reports. 5. Power Button 6. Power Input Port 4.2 Functions 4.2.1 Multiple Charging Modes In order to meet the needs of charging various 12V devices, T120A supports multiple charging modes: SUPPLY, Lead-Acid, LiFePO4, and Custom. The explanations are given below: EN | 007