WARNING Technical Specification EN For indoor use only CAUTION: Risk of Fire Refer to the Instruction Manual for the size, type, and number of batteries to be charged. CAUTION: Risk of Electric Shock Dry location use only Input Voltage AC 100-240VAC, 50-60Hz WARNING RISK OF EXPLOSIVE GAS MIXTURE Connect and disconnect battery leads only when supply cord is disconnected. For a battery installed in a vehicle, first connect charger output lead to ungrounded battery post - not connected to automobile chassis - in accordance with polarity identification and then opposite polarity lead to chassis away from battery; do not connect to carburetor or fuel lines. Disconnect chassis lead first.
For battery not installed in vehicle, refer to Instruction Manual. Do not overcharge battery - See Instruction Manual. Do not smoke, strike a match, or cause a spark in vicinity of battery. Use in well-ventilated area. CAUTION Do not expose to rain. Replace defective cords or wires immediately. CAUTION Risk of Electric Shock. No user serviceable parts. Return to manufacturer for servicing. FCC WARNINGS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
22 23 Working Voltage AC 100-240VAC, 50-60Hz Efficiency 85% Approx. Power 65W Max Charging Voltage Various Charging Current 4A (12V) 4A (6V) Low-Voltage Detection 2V(12V), 2V(6V) Back Current Drain Working Temp.