4. Connect the power plug of the charger to an outlet. 5. Turn on the Power Button and the Power Indicator will turn red. The charger will then begin charging mode setup. 6. Press the MODE button to toggle to the appropriate charging mode for the chemistry of your battery. 7. Press and hold the SET button for 1.5 seconds to confirm the charging mode, and the charger will enter the voltage mode setup. Press + or - to select 12V mode or 24V mode. TIP: If you select the wrong voltage mode, the Error Indicator light will turn red, and there will be an error prompt on the LCD screen. 8.
Press the SET button to confirm the voltage mode, then press + or - to adjust the voltage value to what you need if it is possible. EN | 11