3. From the File menu, choose Exit to exit CardWizard. –or– Click the Minimize button to leave CardWizard running as a minimized card-slot indicator. To see the full CardWizard screen again, double-click the minimized CardWizard window. The OmniBook automatically detects and sets up a PCMCIA card when you insert it in a card slot. If you want to view or change the settings for a modem card or network (LAN) card, you can change them in CardWizard. However, the default settings should be correct for the OmniBook— write them down before changing them so you can restore them, if necessary.
If you want CardWizard to signal you audibly and visually about changes in the upper and lower card slots—use Notify in the Options menu in CardWizard. To prepare a data storage card If you insert a new data storage card in a card slot (drive D or E), you may have to prepare it to store data (format it). Or, the card may contain a disk that’s already formatted, but you may have other setup options, such as setting it up as a compressed disk. Preparing a Data Storage Card Preparing a Data Storage Card • If a PCMCIA hard disk card isn’t automatically enabled, double-click Add New Hardware in Control Panel. The wizard guides you through the required steps.
• If the PCMCIA hard disk card isn’t formatted, in My Computer or in the right side of Explorer single-click the drive, then on the File menu click Format. 38