VTEP-2# show l2vpn evpn evi 13 detail EVPN instance: 13 (VLAN Based) RD: 10.2.2.2:13 (auto) Import-RTs: 13:2 Export-RTs: 13:2 Per-EVI Label: none State: Established Encapsulation: vxlan Vlan: 13 VLAN Layer 2 VNI Ethernet-Tag: 0 State: Established Core If: Vlan99 Interface handling IP VRF forwarding Access If: Vlan13 NVE If: nve1 RMAC: 7486.0bc4.b75d RMAC is the BIA of SVI 99 Core interface Core Vlan: 99 L2 VNI: 13013 L3 VNI: 99999 VTEP IP: 10.255.2.1 Local Tunnel endpoint IP address MCAST IP: 239.13.13.13 VRF: vxlan IP VRF for Layer 3 VPN Pseudoports:
GigabitEthernet2/0/1 service instance 13 Verify that the Remote Layer 3 VNI Details are Learned on Each VTEP The following examples show how to verify that the remote Layer 3 VNI details are learned on each VTEP:
VTEP-1# show nve peers Interface VNI Type Peer-IP RMAC/Num_RTs eVNI state flags UP time nve1 99999 L3CP 10.255.2.1 7486.0bc4.b75d 99999 UP A/M 1w1d Layer 3 Control Plane (L3CP), RMAC of Remote VTEP and Uptime of peer are displayed VTEP-2# show nve peers Interface VNI Type Peer-IP RMAC/Num_RTs eVNI state flags UP time nve1 99999 L3CP 10.255.1.1 7035.0956.7edd 99999 UP A/M 21:27:36 Layer 3 Control Plane (L3CP), RMAC of Remote VTEP and Uptime of peer are displayed Verify that the Layer 3 VNI Tunnel Pseudoport is Installed into Layer 2 FIB in the Core VLAN The following examples show how to verify that the Layer 3 VNI tunnel pseudoport is installed into Layer 2 FIB in the core VLAN:
VTEP-1# show l2fib bridge-domain 99 detail The Core VLAN can be obtained in the output of the show l2vpn evpn evi detail command Bridge Domain : 99 Reference Count : 8 Replication ports count : 0 Unicast Address table size : 1 IP Multicast Prefix table size : 3 Flood List Information : Olist: 5112, Ports: 0 Troubleshooting BGP EVPN VXLAN Verifying the Provisioning of an EVPN VXLAN Layer 3 Overlay Network Troubleshooting BGP EVPN VXLAN 23