Figure 3: Movement of traffic in an EVPN VXLAN network through Layer2 and Layer 3 VNIs In the above figure, Layer 3 traffic moves from host device 1 to host device 4 through the Layer 3 VNI 99999. To verify the movement of inter-subnet traffic in the EVPN VXLAN Layer 3 overlay network, perform these checks: 1. Verify that Local MAC Address and IP Address Entries are Learned in SISF Device Tracking Table, on page 25 2. Verify that MAC Address and IP Address Entries are Learned in EVPN Manager, on page 26 3. Verify that MAC Address and IP Address Entries are Learned in Layer 2 RIB, on page 27 4. Verify that Local MAC Address and IP Address Entries are Learned in MAC VRF, on page 27 5.
Verify that Remote MAC-IP Address Pair is Learend in the VRF, on page 28 6. Verify that IP Routes are Inserted in RIB, on page 29 7. Verify that the Adjacency Table Contains Entries for the VRF-Enabled Core VLAN Interface, on page 29 8. Confirm that Adjacency Exists to the VTEP Tunnel IP Address for a Host Device in IP VRF, on page 30 9. Confirm that Adjacency Exists to Reach Tunnel Destination, on page 30 10.
Confirm that the ICMP Echo Request that Leaves Encapsulated from the Source VTEP Reaches the Loopback Tunnel Endpoint and UDP Destination Port on the Destination VTEP Through the Layer 3 VNI and IP VRF, on page 30 Verify that Local MAC Address and IP Address Entries are Learned in SISF Device Tracking Table The following examples show how to verify that local MAC address and IP address entries are learned in SISF device tracking table: VTEP-1# show device-tracking database vlanid 12 Binding Table has 4 entries, 2 dynamic (limit 100000) Codes:
L - Local, S - Static, ND - Neighbor Discovery, ARP - Address Resolution Protocol, DH4 - IPv4 DHCP, DH6 - IPv6 DHCP, PKT - Other Packet, API - API created Troubleshooting BGP EVPN VXLAN Verifying Inter-Subnet Traffic Movement and Symmetric IRB in an EVPN VXLAN Layer 3 Overlay Network Troubleshooting BGP EVPN VXLAN 25