Tutorials Target Systems The TwinCAT System Manager offers the option to store the activated configuration on the target system (Option "Auto Save to target" Figure 3 [ } 19] ). This option can be helpful because it actualizes the configuration during every activation on the target. If the configuration is available on the target, there is no need to import the configuration to the simulation project. During selection of the target system within the "Add System ..." dialog ( Figure 4 [ } 19] ) of the TwinCAT Simulation Manager there is the option to upload the target-site stored configuration (Checkbox "Load configuration from target system").
The (nonrecurring) upload takes place if the Dialog is confirmed and a copy of the configuration will be created within the simulation project. Fig. 6: Figure 3: Automatic storing of the current configuration on the target system (System manager option). TS1110 19 Version: 1.0