Tutorials Fig. 14: Figure 1: Simulation On Wizard User Interface The description of the command buttons of the Wizard is given in Table 1. Table 1: Buttons on the Wizard The switchover to simulation mode is performed in several steps (Figure 1 and Table 2). Some of these steps are mandatory and some are optional (that is they can be bypassed with the 'skip' button). TS1110 26 Version: 1.0 Push-Button Name Description Skip Skips the step (only if it is optional) Process Processes one single step and stops afterwards Process All Processes all steps.
If any step fails, then the processing will be stopped Cancel Cancels the further processing of the steps and closes the Wizard-Dialog Finish All steps processed successfully and the "Finish" button closes the Wizard-Dialog Redo Appears when one step fails. This gives the opportunity to repeat the actual step.