beckhoff TS1110 — 4.7 Creating simulation template project

Tutorials Table 1: Generation rules for "reverse" or "mirrored" symbolic Fig. 20: Figure 3: Case 1 and 2 (original mode) Figure 4: Case 1 and 2 (simulated) The data types of the allocated instances / symbols POUs, which contain allocated symbols. POU blocks may contain other POUs. These are recursively created when they contain allocated symbols. In the process, the inputs and outputs and their allocations are mirrored. The creation only takes into account symbols / instance paths that lead to a allocated symbol. Other variables will not be created.

Symbols that are added to the orignal project after the Simulation configuration has been created, can be maintained into the simulation project via the Adding symbols to the simulation project [ } 34] functionality. Restrictions: One original PLC project can be bound to exactly one Simulation PLC project. Located Symbols out of Libraries are not supported Located Pointer data types are not supported The next step is to fill the empty shell of the simulation project with simulation code. This is specific to the application. For this task PLC Control Application can be opened via context menu "Open PlcControl ...".

In the simulation mode, the original symbols with their correspondences are connected in the simulation PLC. TS1110 33 Version: 1.0 Original PLC symbol Device I/ O Signal direc- tion Simulation PLC symbol Description 4 VAR OUTPUT _ Allocation %I Input VAR INPUT (% Q) _ The symbol specifies the interface to a device output. The block is not usually filled with code