beckhoff TS1110 — 5.1.5.4 Current Mappings View

User interface Table 1: Context Menu Commands of the 'Simulation Symbols Configuration View' Variables or symbols that are connected differently in simulation mode, are indicated with a red S in the top- left corner of their icon. 5.1.5.4 Current Mappings View The mapping window shows the active mappings for the variable selected in the navigation window [ } 39] . Dependant on the profile (Original or Simulation) and the simulation type (local or remote) the Symbol can be bound to IO-Devices, to other PLCs or to Network Publisher / Subscriber Variables (configured by the Simulation Symbols Configuration View [ } 45] ) Example: The activated profile is the 'Original' mode.

Within this profile the symbol ' MAIN.bRun ' of the Original-PLC is bound to an Input-Terminal on an BK9000 device (Figure 1). Fig. 40: Figure 1: IO Linked in 'Original' profile In the Simulation-Profile the Symbol ' MAIN.bRun ' is linked to a network subscriber variable named 'MAIN.bRun' (see Figure 2). The network variable gets its data from a system with the address '5.1.48.196.1.1'. TS1110 47 Version: 1.0 Type of mapping Description Original No change in simulation mode.