beckhoff TS6120 — 6.1.2.1 Receiving data from the TwinCAT PLC 2.8 and higher

Configuration Instance fbTest2 is not marked, but three member variables (ni1 / no1/ nx1) are marked to be available in all instances - the OPC-DA clent will browse only that three variables. To configure a PLC variable for readonly-access, the comment needs to be set with OPC_PROP[0005], as shown above for the variable iReadOnly. Please make sure to write this property exactly as shown above! 2nd step: Configuration of TwinCAT OPC Server - to be done just once Start the TwinCAT-OPC-Configurator "Start - All Programs - TwinCAT System - TwinCAT OPC - TwinCAT OPC Configurator" Select "I/O Devices" with right click and then menu "New" . TS6120 20 Version: 1.2.0