Configuration Synchronous Read (Cache/Device) Select Synchronous CacheRead or SynchronousDevice Read from the Tools|Item menu to perform a synchronous read from cache/device, respectively, on the selected items. Asynchronous Read (Cache/Device) Select Asynchronous 1.0/2.0 Cache Read or Asynchronous 1.0/2.0 Device Read from the Tools|Item menu to perform an asynchronous read from cache/device, respectively, on the selected items. Reads using the older method, 1.0, uses IAdviseSink to return read complete notifications. The newer method, 2.0, uses connection points to exchange data between client and server.
Asynchronous Refresh (Cache/Device) Select Asynchronous 1.0/2.0 Cache Refresh or Asynchronous 1.0/2.0 Device Refresh from the Tools| Item menu to perform an asynchronous refresh from cache/device on the respective selected items. Refreshes using the older method, 1.0, uses IAdviseSink to return refresh notifications. The newer method, 2.0, uses connection points to exchange data between client and server. Synchronous/Asynchronous Write Select Synchronous Write or Asynchronous 1.0/2.0 Write from the Tools|Item menu to perform a synchronous/asynchronous write on the selected items. Both types of writes utilize the same dialog.
The dialog displays the current value at a 100-millisecond refresh rate. Enter the data to write in the write value column and press Apply to send the data to the server. Pressing "OK" applies the write and closes the dialog. Press Cancel to abort the operation. Secuity Operations You may choose to protect administrative operations on a configuration with an admin password. To do so, select tools->SetPwd from the menu. In the Following Dialog you are prompted to enter the current and new Administration passwords. TS6120 59 Version: 1.2.0