beckhoff TS6120 — 8.2.2 Client

Appendix Users Accounts Authentification is performed on the domain machine, the User Accounts (Name and PWD) or groups are used in the DCOM settings of the Client and the Server Machine. Operation System The Operation System on the Client and the Server Machine should be from the same family (all NT, all 2K or all XP). When doing "mixed configuration" certain (OS specific) settings have to be taken into account. To keep configuration simple it is assumed that two machines have the same operating system installed, are both in the same Domain and have different user accounts logged on. The different users are members of one User Group.

This for this User Group access is granted in the DCOM settings of the Client and the Server Machine. In a mixed configuration (e.g. Server Machine in a Domain and Client Machine in a Workgroup) the so called doubble identification should be done. This means to add User Accounts to the Workgroup Machine which are identically (Name and PWD) the same as the User Accounts on the Domain. By this function calls to the Workgroup Machine can (locally) be identified and granted without "asking" the Domain Controller. 8.2.2 Client This section describes the required settings on the client's side. The client is the computer on which the OPC-Client application, e.g. a visualization, is running.

Usually the OPC-Server is also located on this computer. However, in some environments it may be necessary that OPC-Client and OPC-Server need to be installed on different computers. Both, the OPC-Server's and OPC-Client's DCOM settings need to be configured, so that a remote communication between client and server is possible. The following settings have been tested on Windows 2000, Windows XP and Windows 7 computers. TS6120 69 Version: 1.2.0