Configuration A double-click on the PLC 5 will bring up a dialog in which the "T=>O Size" (inputs, PLC 5 send data) in Words and, when appropriate, the Mac-ID and the "O=>T RPI" or the "T=>O RPI" can be set. These values must be greater than or equal to the network settings for the NUT interval. It is also possible for the Consume Buffer-ID to be set, under parameters. This must agree with the Produce Buffer ID set in the PLC 5. The outputs (PLC 5 receive data) are added by dragging a 5136-CN send adapter from the "Communication Adapter" entry in the EDS library across to the scanner with the left mouse button. TX1000 20 Version: 1.0