beckhoff TX1000 — 3.4 ControlLogix Configuration

Configuration It is also possible for the Produce Buffer ID to be set, under parameters. This must agree with the instance of the input tag set in the Control-Logix. This Produce Buffer ID is also used for addressing the process data from TwinCAT (-> Process data [ } 27] send connection): Please refer to the PDF file https://infosys.beckhoff.com/content/1033/tcsstcn/Resources/ 12495603851/.pdfhttps://infosys.beckhoff.com/content/1033/tcsstcn/Resources/12495602443/.pdf for the settings in RS Networx and in RS Logix 5000. So that the ControlLogix establishes the send connection (the SST card is the producer, Control-Logix the consumer), the scheduling list must be loaded using RS Networx.

This requires the network project to be developed offline in RS Networx and then downloaded. If it does not work, the PC should be rebooted, and the procedure repeated. Network Configuration Double-clicking on network configuration allows the NUT interval and the maximum scheduled and unscheduled Mac-IDs to be set. TX1000 25 Version: 1.0