beckhoff TX1000 — 4.3 Diagnostic Counter

ADS Interface Send Connection A send connection is established to other ControlNet scanners (e.g. ControlLogix, PLC5). Send Data (ADS Write Request) Receive Data (ADS Read Response) 4.2 ID Object The following data is returned in the ADS read response when the ID object is read: 4.3 Diagnostic Counter The following data is returned in the ADS read response when reading the Diagnostic Counter (ControlNet Spec. Part 10, Section 240 "ControlNet Object", Table 10-223, Attribute ID 0x82): TX1000 28 Version: 1.0 Offset Attributes 0x01 reserved 0x02 Extended Status (0: ok, > 0:

error (Status of the connection [} 31]) 0x04 Update counter (is incremented by the sender whenever new data is transmitted) 0x06 Input data (see device description) Offset Attributes 0x00 Output data Offset Attributes 0x00 General status (0: ok, 1: error (Status of the connection [} 31]) 0x01 reserved 0x02 Extended Status (0: ok, > 0:

error (Status of the connection [} 31]) Offset Attributes 0x00 Vendor-ID 0x02 Device-Type 0x04 Product-Code 0x06 Major-Revision 0x07 Minor-Revision 0x08 Status 0x0A Serial-Number 0x0E Length of the product name 0x10 Product-Name Offset Attributes 0x00 Number of Errors in Error-Log 0x02 Error-Log[8] 0x0A Good Tx-Counter 0x0D Good Rx-Counter 0x10 Framing-errors detected on active selected Channel 0x11 Framing-errors detected on Channel A 0x12 Framing-errors detected on Channel B