ADS Interface 4.7 Status of the Connection When the process data is read, the status of the connection (both the General Status and the Extended Status) are returned in the first four bytes. The following values are possible here (in accordance with the ControlNet specification V2.0, Section 4.4): Requirements TX1000 31 Version:
1.0 Offset Attributes CHK FOR CABLE (0x04), _ _ WAIT TO ROGUE (0x05), _ _ WAIT FOR ONLINE (0x06), _ _ SEND ALIVE (0x07), _ WATCH (0x08), LISTEN (0x09), ATTACHED (0x0C) 0x04 Reserved General Status Extended Status Meaning 0x00 Connection established, everything OK 0x01 0x0100 Connection already established 0x01 0x0103 Transport Class and trigger combination is not supported 0x01 0x0106 Owner conflict (e.g.
if an attempt is made to use a second connection to access the outputs of the first) 0x01 0x0107 Connection not present 0x01 0x0108 Invalid Connection type 0x01 0x0109 Incorrect Connection Size 0x01 0x0110 Device not ready 0x01 0x0111 RPI supervision is not supported 0x01 0x0113 Maximum number of connections has been reached 0x01 0x0114 Vendor ID or Product Code in the Electronic Key do not agree 0x01 0x0115 Product type in the Electronic Key is not consistent 0x01 0x0116 Major or minor revision in the Electronic Key is not consistent 0x01 0x0117 Invalid Connection Point 0x01 0x0118 Invalid configuration format 0x01 0x0119 No Control connection available 0x01 0x011A No further connection in the device's application 0x01 0x0203 Connection monitoring has activated, so connections can not be made 0x01 0x0204 Timeout during Unconnected Send 0x01 0x0205 Parameter error during Unconnected Send 0x01 0x0206 Data is too long for Unconnected Send 0x01 0x0301 No more memory available 0x01 0x0302 Network bandwidth not sufficient for this connection's data 0x01 0x0303 Screener no longer available 0x01 0x0304 Device can not send real time data 0x01 0x0311 Port in the Path Segment is not available 0x01 0x0312 Link address in the Path Segment is not available 0x01 0x0315 Incorrect segment type or segment value in the Path 0x01 0x0316 Path and Connection not consistent when closing the connection 0x01 0x0317 Segment not present, or Encoded Value in the Network Segment is invalid (usually disappears after TwinCAT is restarted)