Beckhoff Automation GmbH & Co. KG TX1200 — 4.9 Log

Individual Components 4.8 Help System Should you encounter any problems with TwinCAT PLC Control during your work, online help is available to help to solve them. There you will find all the information that is also contained in this handbook. The help refers directly to Beckhoff Information System. The Beckhoff Information System has to be installed. 4.9 Log The log stores in chronological order actions that occur during an Online session. For this purpose a binary log file (*.log) is set up. Afterward, the user can store excerpts from the appropriate project log in an external log. The log window can be opened in either Offline or Online mode and can thus serve as a direct monitor online.

'Window''Log'' To open, select the menu item 'Window' 'Log'. In the log window, the filename of the currently displayed log appears after Log: . If this is the log of the current project, the word "(Internal)" will be displayed. Registered entries are displayed in the log window. The newest entry always appears at the bottom. Only actions belonging to categories that have been activated in the 'Filter' field of the menu ' Project' 'Options' 'Log' will be displayed. Available information concerning the currently selected entry is displayed below the log window: Category: The category to which the particular log entry belongs. The following four categories are possible: User action:

The user has carried out an Online action (typically from the Online menu). Internal action: An internal action has been executed in the Online layer (e.g. Delete Buffers or Init Debugging). Status change: The status of the runtime system has changed (e.g. from Running to Break, if a breakpoint is reached). Exception: An exception has occurred, e.g. a communication error. Description: The type of action. User actions have the same names as their corresponding menu commands; all other actions are in English and have the same name as the corresponding OnlineXXX() function. TX1200 113 Version: 1.3