Editors All editors for POUs consist of a declaration part and a body. These are separated by a screen divider. The sequential function chart editor is a graphic editor. The most important commands are found in the context menu (right mouse button). Tooltips show in Offline as well as in Online mode and in the zoomed state the full names or expressions of steps, transitions, jumps, jump labels, qualifiers or associated actions. For information about the sequential function chart, see the chapter about Sequential Function Chart editor [ } 152] . The editor for the sequential function chart must agree with the particulars of the SFC.
In reference to these, the following menu items will be of service. Marking Blocks in the SFC A marked block is a bunch of SFC elements that are enclosed in a dotted rectangle. (In the example somewhat above, the step is marked Switch1.) You can select an element (a step, a transition, or a jump) by pointing the mouse on this element and pressing the left mouse button, or you can use the arrow keys. In order to mark a group of several elements, press for a block already marked, and select the element in the lower left or right corner of the group. The resulting selection is the smallest cohesive group of elements that includes both of these elements.
Observe that all commands can only be executed, if they do not contradict the conventions of the language. 'Insert' 'Step Transition (before)' + This command inserts a step in the SFC editor followed by a transition in front of the marked block. 'Insert' 'Step Transition (after)' + This command inserts a step in the SFC editor followed by a transition after the first transition in the marked block. 'Insert' 'Alternative Branch (right)' + TX1200 153 Version: 1.3