Beckhoff Automation GmbH & Co. KG TX1200 — 6.3 PLC Configuration

Resources Language: Choose here a language file which should be used when the language in TwinCAT PLC Control is changed. Regard that for this purpose the language file also must contain the translations for the text strings of the alarm configuration. In this context see the following descriptions: Visualization, Setting the language [ } 309] Translate project into another language [ } 66] 6.3 PLC Configuration The PLC configuration is dependent on the respectively configured hardware. TwinCAT supports fourdifferent hardware platforms: PC (i386): the PLC program runs on the PC or CX10x0. PC (ARM): the PLC program runs on a CX9000. BCxxxx: the PLC program runs on a buscontroller.

BCxx50 or BXxxxxx If you want to run the PLC program on a BCxxxx/BCxx50 or BXxxxx Bus Terminal PLC you can choose whether you want load the program via AMS (dependent on the fieldbus) via serial interface. TX1200 172 Version: 1.3