Resources With the " Insert" "Append Task" command, you can insert a task at the end of the configuration tree. With the " Insert" "Insert Program Call" , a program call will be inserted. Further on for each entry in the configuration tree an appropriate configuration dialog will appear in the right part of the window. There options can be activated/deactivated resp. inputs to editor fields can be made. Depending on which entry is selected in the configuration tree, there will be the dialog for defining the 'Taskattributes' or the dialog for defining a 'Program Call'. The settings made in the dialogs will be taken over to the configuration tree as soon as the focus is set to the tree again.
A task name or program name can also get edited in the configuration tree. For this perform a mouseclick on the name or select the entry and press the button to open an edit frame. You can use the arrow keys to select the previous or next entry in the configuration tree. 'Insert' 'Insert Task' or 'Insert' 'Append Task' With this command you can insert a new task into the task configuration. If a task is selected, then the "Insert Task" command will be at your disposal. The new task will be inserted after the selected one. If the words Task Configuration are selected, then the "Append Task" is available, and the new task will be appended to the end of the existing list.
The dialog box will open for you to set the task attributes. Insert the desired attributes: Name : a name for the task; with this name the task is represented in the configuration tree; the name can be edited there after a mouseclick on the entry or after pressing the key when the entry is selected. Priority (0-3) : (a number between 0 and 31; 0 is the highest priority, 31 is the lowest), Type : cyclic : The task will be processed cyclic according to the time definition given in the field 'Interval'. Freewheeling, triggered by event or triggered by external event: These task types are not supported! Properties : Interval (for type 'cyclic'):
the period of time, after which the task should be restarted. If you enter a number, then you can choose the desired unit in the selection box behind the edit field: milliseconds [ms] or microseconds [µs]. Inputs in [ms]-format will be shown in the TIME format (e.g. "t#200ms") as soon as the window gets repainted; but you also can directly enter the value in TIME format. Inputs in [ms] will always be displayed as a pure number (e.g. "300"). 'Insert' 'Insert Program Call' or 'Insert' 'Append Program Call' With these commands you will open the dialog box for entering a program call to a task in the task configuration.
With "Insert Program Call" , the new program call is inserted in front of the cursor, and with "Append Program Call" , the program call is appended to the end of the existing list. In the field, specify a valid program name for your project, or open the Input Assistant with the button... or with to select a valid program name. The program name can also get edited in the configuration tree. For this perform a mouseclick on the name or select the entry and press the button to open an edit frame. If the selected program requires input variables, then enter these in their usual form and of the declared type (for example, prg(invar:=17)). TX1200 174 Version: 1.3