Reference programming TX1200 242 Version: 1.3 Number Error Message Possible Cause 4053 '%s' is no valid box or operator Replace ' ' by the name of a POU or an operator defined in the project. 4054 POU name expected as parameter of 'INDEXOF' The given parameter is not a valid POU name. 4060 'VAR IN OUT' parameter '%s' of '%s' needs _ _ variable with write access as input. To VAR IN OUT parameters variables with _ _ write access have to be handed over, because a VAR IN OUT can be modified within the _ _ POU. 4061 'VAR IN OUT' parameter '%s' of '%s' must be _ _ used.
A VAR IN OUT parameter must get handed _ _ over a variable with write access, because a VAR IN OUT can be modified within the POU. _ _ 4062 No external access to 'VAR IN OUT' _ _ parameter '%s' of '%s'. VAR IN OUT Parameter only may be written or _ _ read within the POU, because they are handed over by reference. 4063 'VAR IN OUT' parameter '%s' of '%s' must not _ _ be used with bit addresses. A bit address is not a valid physical address. Hand over a variable or a direct non-bit address. 4064 'VAR IN OUT' must not be overwritten in local _ _ action call! Delete the parameters set for the VAR IN OUT _ _ variable in the local action call.
4070 The POU contains a too complex expression Decrease nesting depth by dividing up the expression into several expressions. Use intermediate variables for this purpose. 4071 Network too complex Divide up the network into several networks. 4072 Inconsistent use of an action identifier in FB type (' ') and instance (' '). You have defined two actions of a function block fb: e.g. a1 and a2, but in the call of one of the actions in the FBD you are using a type (string within the box, e.g. fb.a1 different to that used in the instancename (e.g. inst.a2, above box). Correct the name correspondingly into the name of the desired action.
'^' needs a pointer type You are trying to dereference a variable which is not declared as a pointer. 4110 '[ ]' needs array variable [ ] is used for a variable which is not declared as an array with ARRAY OF. 4111 Index expression of an array must be of type 'INT' Use an expression of the correct type or a type conversion. 4112 Too many indexes for array Check the number of indices (1, 2, oder 3), for which the array is declared and remove the surplus. 4113 Too few indexes for array Check the number of indices (1, 2, oder 3), for which the array is declared and add the missing ones.
4114 One of the constant indizes is not within the array range Make sure that the used indices are within the bounds of the array. 4120 '.' needs structure variable" The identifier on the left hand of the dot must be a variable of type STRUCT or FUNCTION BLOCK or the name of a _ FUNCTION or a PROGRAM. 4121 ' ' is not a component of The component ' ' is not included in the definition of the object . 4122 '%s' is not an input variable of the called function block Check the input variables of the called function block and change ‘ ' to one of these. 'LD' expected Insert at least one LD instruction after the jump label in the IL editor.
4201 IL Operator expected Each IL instruction must start with an operator or a jump label.