Beckhoff Automation GmbH & Co. KG TX1200 — 10.1.4.1 Configure Visualization Elements

Visualization The configured text will appear online in the prescribed alignment within the element: horizontallyleft , center or right and verticallytop , center or bottom . If you use the Font button, a dialog box for selection of the font will appear. Select the desired font and confirm the dialog with OK . With the Standard - Font button you can set the font that is selected in the project options ('Project' 'Options' 'Editor').

If the font is changed there, then this font will be displayed in all elements except in those elements for which another font has explicitly been selected by using the Font button Textvariables Dialog Box for Configuring Visualization Elements (Text Category) variable which should dynamically set color and font of that string which is defined in category 'Text'. At best enter the variable name with the aid of the input assistant ( ). You can also use components of the structure VisualObjectType to set the text properties. For this see the description of category 'Programability'; there you will find the possible values of the particular structure components and their effect.

If there are corresponding static definitions in category 'Text', these will be overwritten by the dynamic parameter values In case of multiple definition of an element property consider the specific order of precedence concerning according to which a value might be overwritten in online mode by another. The parameters of the dialog: TX1200 271 Version: 1.3