Beckhoff Automation GmbH & Co. KG TX1200 — 10.1.4.1 Configure Visualization Elements

Visualization Motion absolute In the visualization element configuration dialog box, in the Motion absolute category, X- or Y-Offset fields variables can be entered. These variables can shift the element in the X or the Y direction, depending on the respective variable value. A variable in the Scale field will change the size of the element linear to its current value. This value, which is used as scaling factor, will be divided by 1000 implicitely, so that it is not necessary to use REAL-variables in order to get a reduction of the element. The scaling always will refer to the balance point.

A variable in the Angle field causes the element to turn on its turning point, depending on the value of the variable. (Positive Value = Mathematic Positive = Clockwise). The value is evaluated in degrees. With polygons, every point rotates; in other words, the polygon turns. With all other elements, the element rotates, in such a way, that the upper edge always remains on top. The turning point appears after a single click on the element, and is displayed as a small black circle with a white cross. You can drag the turning point with a pressed left mouse button.

In online mode the variables which are set in the 'Motion absolute' dialog will override the values of structure components which additionally might be used to define the same property ('Programability'). In case of multiple definition of an element property consider the specific order of precedence concerning according to which a value might be overwritten in online mode by another. TX1200 275 Version: 1.3 Parameter Description: Example of an en- try: Example for using the variable in the program: corresponding component of structure VisualOb- jectType Fillcolor: fill color "plc prg.var fillcol" _ _ var fillcol:= _ 16#FF00FF -> Fill color Pink dwFillColor Fillcolor alarm:

fill color if the 'Change color' variable is TRUE "plc prg.var fillcol a _ _ _ " var fillcol a:= _ _ 16#FF00FF -> Alarm fill color Pink dwFillColorAlarm Frame color: frame color "plc prg.var framec _ _ ol" var framecol:= _ 16#FF00FF -> frame color Pink dwFrameColor Framecolor Alarm: frame color if the 'Change color' variable is TRUE "plc prg.var framec _ _ ol" var framecol:= _ 16#FF00FF -> alarm frame color Pink dwFrameColorAlarm FillFlags: The current inside color configuration can be activated (FALSE) resp. deactivated (TRUE).

"plc prg.var col off" _ _ _ var col off:=1 _ _  the color definition for the fill color will not be regarded, that for the frame remains valid dwFillFlags FrameFlags: Display of the frame (solid, dotted etc.) "plc prg.var linetype _ _ " var linetype:=2; -> _ frame will be displayed as dotted line dwFrameFlags